ALO 191-MS-4

Machine: ALO 191-MS-4
Bandwidth: 6-38mm
Band thickness: 0.4-1.3mm
Toothpitch: 3-18 TPI
Capacity: 5-15m/min
Voltage: 400VAC ±10% 3-phase

Induction tooth hardening with bend straightening and mechanical pinch roller straightening unit

The machine is fast and has an easy start up and change over. The air-cooled oscillator tubes make the generators high in efficiency and low in energy consumption. It has a high reproducibility due to accurate digital/analogue settings of power, speed and work coils.

Bend straightening unit
A section of the bench are hinged in such manner that the band can be bent over a high point to counteract camber effect during teeth hardening on the most narrow bands, typically 6-12mm width.

Mechanical pinch roller straightening unit
The second straightening device consists of a pair of rolls situated after the quench tank. The mechanical straightening unit are best suited to work within the band widths of 12-20 mm, thickness of 0.45-0.6 mm with TPI between 3-6 TPI.

Band feed system
The band feeder consists of two units, one acting as a feeder, the other as an adjustable brake to control the band tension. The system is designed for accurate speed and guiding and electromagnetic friction brake for optimal control of band tension.

 

Read more:

You may also like…

Band Saw Blades

ALO 90915-S

Band Saw Blades

ALO 191-MST-4

Band Saw Blades

ALO 881

Band Saw Blades

ALO 880-CTL

Band Saw Blades

ALO 880